Tonino Lamborghini SPYDER 9001 men's watches

singlelady
Mensajes: 2
Registrado: Lun Sep 16, 2019 7:27 am

Tonino Lamborghini SPYDER 9001 men's watches

Mensaje por singlelady » Mar Sep 17, 2019 3:49 am

Imagen

Tonino Lamborghini SPYDER 9001 men's watches



The above situation shows that the mechanism of Tonino Lamborghini SPYDER 9001 men's watches mechanical motion is normal. Otherwise, the failure of the previous mechanism of the automatic mechanism should be repaired before it is repaired. To avoid repetitive disassembly of the automatic mechanism. Check if the automatic mechanism is malfunctioning. The automatic hammer can rotate. If the transmission of the automatic mechanism is flexible, the pawl bounces on the teeth of the large steel wheel, indicating that the automatic mechanism is basically normal. If the parts of the manipulator pole rotate together when the automatic hammer rotates, the disconnection device is faulty. When the hand is applied, the automatic hammer appears at high speed to indicate another detachment device. There is something wrong with the equipment.

Analysis of Common Faults of Automatic Mechanical Meter

When using an automatic watch, because its spring can always maintain a certain degree of tightness, it can be removed from the wrist and remain still, and can still maintain more than 24 hours of walking time. After years of using automatic watches, their flexibility will also be reduced due to wear and tear of automatic parts. Therefore, watches should oscillate for a period of time before going to bed every night to compensate for the lack of strength.

If the automatic device of the automatic swiss military watches fails, it can also be used to tighten the spring, but it will not be full. Since the gears and hammers of the automatic parts rotate with the rotation of the large steel wheels, it is more difficult for the hand to feel entangled.

Automatic watch preventive measures - usually wear to avoid vibration. Proper amount of activity to maintain normal operation (when the wearer's activity is very small, walking may be very slow, which is normal. Please rotate the crown 20-30 times for the first time so that the spring is initially wound. Although the watch is shock-proof, it is easy to break the tip of the pendulum or the Journal of the wheel axle when the external impact is large, and the vibration of the slow needle will also affect the travel time. Prevent magnetization. Although watches are made of non-magnetic materials that are difficult to magnetize, they are greatly affected by magnetic fields when walking, such as magnetic buckles on TV sets, radio horns, backpacks or wallets. Watches are waterproof. Try not to let your watch swim and wash clothes. Once wet or damp, you can't pull the watch to adjust it, but wipe it immediately. As the head is relatively protruding, try to avoid collision. In addition, attention should be paid to the gap between the head and the case. If it is too small, it will affect the operation, and the effect will not affect the waterproof performance. Look at cleaning. Generally speaking, 3 to 5 years of washing mud is determined by the following factors: Watch sealing problem 2 watch wear degree (wear degree)

quartz best swiss replica watches can extend the washing cycle 4 men's watch or pocket watch can be relatively thin or women's watch has a long washing cycle. Long-term use of watches. It will not be put in a suitcase with camphor balls and sanitary balls, which will degrade the oil. When the watch is removed, it will be wrapped or worn at inaccurate intervals every month to ensure flexible internal activities.

Rose gold is an alloy of gold and copper. Because of its copper content, the color appears to be rose, so it is called Rose gold. Because of its bright colour and applicability to jewelry, it is favored by more and more young people.

What is the composition of the rose gold watch?

Most of the gold plating layers on rose gold watches are 14K gold. In addition to 58.5% pure gold, this kind of gold also contains a certain amount of silver. After reacting with some volatile industrial exhaust gases in the air, black silver sulfide film was formed on the surface, which resulted in the loss of golden luster of the gold plated surface. Therefore, wear rose gold watches to avoid exposure to chemicals and waste gases, such as gas, liquefied gas and sulfur soap, and always keep the rose gold watch dry and clean. It's better to wipe it with flannel once a week. In addition, chloride in sweat is very corrosive to rose gold watch athttps://www.highluxurystore.com.

Responder